By To ensure your safety and that of your family, it’s important to make sure that you don’t have slippery composite decking in your home during the winter. When there’s ice and water on the surface of your decking, you may be tempted to remove it yourself. Don’t do this! Letting water freeze and then trying to chip off ice can cause damage to your composite decking, leading to uneven boards and cracks that show through to the inside of your house and cause more problems than just slippery decking in the first place.
What happens if I slip?
If you’re using plastic decking, the biggest problem is that it might crack and split. If you’re using wood, it will most likely dent or scratch. Composite decks are usually made of fiberglass and resin, which can be damaged if they freeze. This can lead to board warping and bending, the eventual weakening of the wood fibers, or splitting between the boards. To prevent this from happening, there are some things you can do when your deck is wet:
1) Allow water on the surface of your deck to evaporate naturally before applying ice melt;
2) Remove ice from your deck every two hours as it accumulates;
3) Sweep away any snow before it melts on your deck;
4) Allow any rain to fall onto your non-slip pad in order to avoid slipping.
Why does my deck get slippery?
Snow and ice accumulate on your wood deck, making it slippery. It is not the snow or ice that causes the problem, but the water that melts from the snow or drips off of melting ice. This accumulation of water on top of snow and ice can cause many problems for your wood deck including accidents due to slipping. The good news is there are some steps you can take to help prevent accidents by keeping your wood deck safe and slippery free.
What about using an anti-slip coating?
An anti-slip coating is important because it will help prevent accidents, as well as make the surface less slippery in the future. This is also an important consideration if you are using komposittrall problem. Plastic doesn’t offer much traction, so an anti-slip coating would be necessary. A quality anti-slip coating will work with the plastic and not damage it while protecting you from slips and falls.
Are pressure treated boards safe to use?
Pressure treated boards are not as safe as plastic decks, because they can have formaldehyde from the chemicals that were used in the process. Formaldehyde is known to be carcinogenic and has been linked to nose and throat cancers, asthma, chronic bronchitis and eye irritation. It can also cause coughing, nausea and headaches if you’re exposed to high levels of it for extended periods of time. However, its important to note that pressure treated boards with low levels of formaldehyde don’t pose any health risks at all!
What’s the best way to remove snow and ice off my non-slip decking?
The best way to remove snow and ice off your non-slip composite decking is by using a shovel. This will ensure that you are not damaging your surface. If you do not want to use a shovel, then be sure that you have something like an ice scraper or snow brush on hand so you can get the job done quickly and efficiently.
Is it safe to walk barefoot on my multi leveled deck?
It is safe to walk on your multi-leveled wood deck but do make sure the surface is clean and dry. One of the great features of wood decks, as opposed to komposittrall jula, is that they are not slippery even when there is water on the surface. The problem, however, is when there is an accumulation of both ice and water on your wooden flooring. Aside from being the cause of accidents, ice and its removal can cause some damage to non-anti slippery composite decking.
Read more: Composite vs Wood Decking: Which Pays for Itself quicker?
